Guide To Replacement Handles For Windows: The Intermediate Guide In Replacement Handles For Windows

Replacement Handles For Windows

Window handles are among the easiest parts of your uPVC windows to replace. A change to locking handles could also increase security for your home and satisfy insurance requirements. It can also be a necessary security measure for homes with children.

Exposure and regular use can cause damage to a window handle. It needs to be replaced. This is a simple job that anyone can do.

Lift Rail

A lift rail is a handle used to open or close a double-hung or single-hung windows replacement. It can also be used to tilt your uPVC windows. If the window isn’t opening or closing, or if the tilt function isn’t working it could be because of a problem with the handle or lock. The good thing is that you don’t have to replace the whole uPVC window – it’s often possible to just replace the handles or locks.

It is possible to use different locks and handles to open and close your windows depending on the type of window you have. If your uPVC windows have multipoint locking mechanisms (as as shown in the image above) you’ll need to make use of an espagnolette handle that has a square metal bar at the rear of the handle that is inserted into the frame of the window and connects to the gearbox for the lock when you turn it.

This handle style is available in a variety of popular finishes. It is reminiscent of Arts & Crafts style and is a great fit for Colonial and Craftsman homes. It’s perfect for large or heavy drawers or sashes, where the hook-style lift could be a hindrance or catch other items.

Another option is to utilize a crank handle on your casement, awning or hopper windows. They are simple to open and close, replacement handles for windows so they’re a good choice for large spaces where you’ll be using them often. The crank handle is a long handle that extends as you turn it. It folds away when not in use.

The window balance is a less visible component of uPVC windows. It counterbalances the weight of the sash to keep it open. They are located between the sash window replacement of the window and the frame. They are available in a variety of types including clock spring balances, block and tackle balances as well as spiral balances. The balances could be the issue if your window is difficult to open or doesn’t stay opened. If they are damaged or worn, you’ll have to replace them.

Crank Handle

Crank handles allow homeowners to precisely control the position of windows which allows them to obtain the perfect amount of light and airflow. The handles also add a sophisticated look to the window’s interior or exterior. The crank handle, like many other window components, is subject to wear over time, particularly if exposed to the weather. The handle could break or loosen. If this happens, it’s crucial to find a replacement quickly so that the homeowner can continue enjoying their window’s functionality and beauty.

Truth Window Hardware Company has various choices for casement window crank handles that be suitable for your window’s type and the manufacturer. Made of premium materials, these window crank handles are constructed to last and designed with customers requirements in mind. This includes offering a broad selection of finishes and designs to complement any architectural style.

It’s easy and inexpensive to restore the functionality of your window using a replacement crank handle. It’s an easy to install part that’s readily available at hardware stores and home centers. stores. Once you’ve found the perfect crank handle for your window, replace it following the steps in the user guide.

Begin by opening the window until the plastic guide bushing of the arm is aligned with the notch on the guide track (Photo 1). Then, slide a sturdy putty knife between the frame and casement cover to cut off the casing without damaging the wood pieces inside. Then, take off the trim mounting screws to remove the crank arm from casement cover. Remove the crank arm and handle and compare them with the old ones to ensure they are in line.

Cam Lock

Through time and regular use, or even accidental or intentional damage, uPVC window handles and locks can get damaged. This can be a stressful experience as it may seem that a complete replacement is necessary but it’s not always the case. You might only need to replace the handle or the lock, which will cost a fraction of the cost of a new window would.

When you’re looking for an alternative handle, the first step is to determine the type of handle that your window has. This can be done by observing the handle itself or by measuring the spindle which runs through the locking mechanism. This will help you find the right handle when shopping for the replacement.

There are a variety of window handle, such as cam locks. These are commonly used on casement, awning, and hopper windows to aid in making them open and close. You can use a cam lock to enhance weatherproofing and add extra security to your uPVC window. It works by combining unidirectional double cams with super keep to increase security and enhance resistance to jemmy attacks.

Another type of uPVC window lock is the espagnolette handle. The handle is equipped with an elongated spindle that extends from the handle and is inserted into the lock gearbox, which is then turned to activate the locking mechanism and open your window. This handle comes in different designs. The most effective method to determine the handle is to examine the shape, as well as any stamps or markings on the lock.

One of the most sought-after types of espagnolette handles available is the Truth Two Hole Cam Handle 1-1/2 Inch With Ring Pull. It is a hand-held handle that has been produced since the 1970s. It is polished nickel finish. It also features an adjustable grip. It is designed to fit a sash which can tilt open. It has a solid 3mm cam arm lock to improve security. This handle is available with keys that are keyed together for convenience, or keys that are specific to each window.


Screen handles can be replaced with locks to help protect the window from intrusion by unwanted burglars. This is a simple process that does not require any special tools. Use the screwdriver to reduce the spindle until it is the right size. You can also use a Stanley Knife since some screws have plastic caps.

Lincoln casement operating hardware is available in seven different finishes for both wood and aluminum windows. Optional folding handle is available for windows with casement glass to offer less clearance to remove the window screen.

Add a Comment

Your email address will not be published.