10 Strategies To Build Your Repair Window Empire

When It’s Time to Repair Windows

It is important to be cautious when fixing your windows. Wear safety goggles and gloves to shield yourself from glass shards.

An easy fix for a broken window is to apply a plastic cover over the crack. This will stop rain, snow, and Window Doctor insects from entering your home.

Cracked Glass

Glass that is cracked not only makes your home less attractive, but it can also let drafts and other elements to enter the house. It doesn’t matter whether the cracks result from an impact, like soccer or a baseball or stress, such as an abrupt temperature drop, but it is essential to have them repaired as soon as you can to prevent further damage and to keep your windows working correctly.

Use clear tape to cover the cracks in your window if it’s not damaged. This is a quick, low-cost solution to protect your Window Doctor from water, dust bugs and other sand. It also shields your windows from the elements.

However, if the crack is extensive or appears to be getting worse, you should consult an expert. A professional glazier can identify the cause of a crack and recommend the most effective repair method.

Impact cracks are the most frequent window cracks. They typically occur when a sharp object strikes your window with enough force that it breaks. These cracks usually display a starburst of lines and broken pieces. They can be dangerous if they become loose. This crack can compromise the gas in the panes of your double-pane window and reduce its energy efficiency.

Stress cracks are a different kind of crack that develops over time because of extreme temperature fluctuations and other environmental factors. These cracks begin around the edges of your window and can eventually expand into full-blown break.

A more serious, but doable crack is a pressure crack. It is a curvy curved line that can extend across the window on one or more sides. It could be caused by high or low pressure which can cause the glass to expand or contract.

There are other products that can be used to upvc repair cracks in window glass if you’re willing go beyond tape and nail varnish. Glass Repair Film, while more expensive can give your windows more protection and durability. If you’d prefer to make it yourself epoxy is an adhesive that can be used to fill in cracks and prevent further damage. It can make your window appear like it never had any cracks in it at all.

Leaking Windows

If you notice a damp spot under your window, or the wood around it is soft or decaying, it may be the time to fix your windows. Mold and mildew thrive in excess moisture and can cause a number of problems within your home. They can cause indoor air pollution, sagging walls, and can worsen allergies. If not addressed they can cause structural damage to the structure of the house.

It is best to call an expert if the water is visible or coming from outside. Leaking windows are among the leading causes of mold and structural damage and should not be left untreated.

In many instances, a single layer of caulking is all that’s needed to stop the leaks. Before applying the caulking, it’s necessary to clean the area and take off any caulking you have already applied.

You’ll also need to check the weep holes on the frame to make sure they’re not blocked by debris. These are designed to drain off excess rainwater, but they can be clogged by insect corpses and other debris in time.

Check the seal between the double-paned window and the frame made of metal. This creates a barrier of gas between the panes, making the windows more energy efficient. Over time the seal will be worn out and allow water into your home.

Water stains on walls and ceiling are another indicator of a leak. These occur when drywall is saturated by moisture which weakens the fibers, causing discoloration. Peeling paint is another indicator Window Doctor of water altering the adhesive properties of the paint and removing it away from the wall.

Faux Muntins & Mullions

In the past, muntins and mullions (or glazing bars in the UK) separated and held glass panes in classic multi-pane windows. Since the larger expanses of glass with tempered coatings became available following WWII, they fell out of fashion. They’re used only as decorative elements in some older homes.

Most of the time, a single or small group of these wooden supports could be damaged by rain or wind and cause cracks to the window. The good thing is that you are able to repair most of these rotting or brittle parts.

First employ a rag to clean the affected areas. Make use of ammonia-based cleaners that will not leave residue. Get rid of any rotting or loose pieces and trim the intersections of the horizontal and vertical window muntins with an exacta knife. Once you’ve trimmed the intersections, you can tape off the lower part of the window frame using painter’s tape. Now, you’re able to apply a thick layer of white paint, paying particular attention to areas which were lightly coated on the first coat. Allow the paint to fully dry before removing the masking tape and applying the second coat.

If the problem is more severe, such as an hourglass-shaped crack in the middle of the window, it’s best to replace the sash. In these instances, you’ll need to look for a replacement window that is compatible with the window that is in place in terms of style and size.

Installing grid windows is a less expensive option. These windows have a full pane of glass with the muntins being attached to the surface which gives them a split appearance. They’re not as energy efficient as traditional windows, however.

If you’re looking for an easy method to modernize your windows, think about installing a new drip cap in order to stop water from leaking around the window frame. You can purchase a range of these aluminum drip caps at the majority of home centers for around $20. They’re much simpler to install than windowsash replacements and come with the same function as a genuine muntin or mullion.

Broken Sashes & Frames

A broken window sash can be an obvious indication that it’s time for assistance. If not taken care of the broken sash may cause wood rot, water leaks and more serious issues with the frame and sill. If you’ve broken a sill, you must replace it as soon as possible to ensure that your window is sealed and working.

The issue is usually caused by worn-out or poorly installed cords. Luckily, replacing them is fairly easy and can be done in the majority of double-hung windows. First, you’ll need to take off the metal tabs holding the sash. To do this, you need to push up on one side (it does not matter which side) of the sash, and then pull it toward the opposite side to remove it from the window frame. To get access to the cords for the sash, you’ll have to remove with care the parting strips that separate the sash.

It is crucial to check the metal tabs on the old sash with the new one. If they’re different it’s difficult to insert the new one into its slot and impact how the sash functions. Luckily, this is easily rectified by placing the tabs in their correct positions on the new window.

You’ll need to inspect your window frame, too for any damage or decay. It’s a good idea do this regularly as wood shrinks and becomes less durable as time passes, particularly with exposure to the elements. You should repair any visible damage as fast as you can to avoid a more serious issue.

If your window frames are in poor condition, you’ll have to treat them with a homemade preservative made with half mineral spirits and half boiling the linseed oil. After the treatment is dry, you can finish your frames with the finest latex paint. A fresh coat of paint will protect your window from the elements too.

Add a Comment

Your email address will not be published.